Description

Frankenstein’s Monster with Removable Brain horror 3d print

Print Settings
Rafts:No

Supports:Yes

Resolution:250

Infill:8

Notes:
Make sure to cut off the bottom in your slicer to ensure a flat bottom. Make sure to print with some support to guarantee bolts do not droop. Also make sure your model has at least 8% infill or more to guarantee there are no holes in the top.

Head

Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Natural Clear PLA from 3D Solutech
Printed with support, 81 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
305 mm Height (12 inches)
40h Print Time
0.8 mm Shell Thickness
7% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
265.73 m of filament used
230C Print Temperature

Brain

Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Natural Clear PLA from 3D Solutech
Printed with support, 55 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
140 mm Height (5.5 inches)
20h Print Time
0.8 mm Shell Thickness
8% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
140.26 m of filament used
230C Print Temperature